Flow Chart of Quality Inspection System in Garment Sector
Flow Chart of Quality Inspection System in the Garment Sector:
Inspection can be defined as the visual examination of some standards. Quality inspection is an important issue in the garments manufacturing sector. Quality inspector ensures the right quality of a garment export order, whether this order is ready for shipping or not. During the inspection, the quality inspector obeys a process flow chart of the quality inspection system which has been discussed in this article.
Flow Chart of Quality Inspection System in the Apparel Sector:
Quality inspection of garments or fabrics can be done by maintaining four systems. Those are in the below:
- 4 point system
- 10 point system
- Granville “78″ system.
- Dallas system.
But the 4 point system is most used in today’s ready-made garments sector.
Process flow chart of 4 point quality inspection system has given in the following:
Confirmation of garments quantity
↓
Confirmation of trimmings and accessories
↓
Measurement inspection
↓
Garment’s in-side inspection
↓
Garment’s out-side inspection
↓
Final inspection
↓
Packing
All the above processes have discussed in the below table:
|
SL No.
|
Process
|
Procedure
|
|
01
|
Confirmation of garments quantity
|
At the very first step of quality inspection, a quality inspector should confirm the total quantity of garments according to the buyer’s requirement.
|
|
02
|
Confirmation of trimmings and accessories
|
Here, the quality inspector should check various trimmings and accessories needed in the garments according to the buyer’s instructions.
|
|
03
|
Measurement inspection
|
In this stage, the quality inspector should compare the garment measurements against the customer’s measurement charts such as sleeve length, garment length, etc.
|
|
04
|
Garment’s in-side inspection
|
Here, the quality inspector should check the garment’s inside part to find out various problems such as unbalanced sleeve edge, incorrect side shape, etc.
|
|
05
|
Garment’s out-side inspection
|
The quality inspector should check here the garment’s outside part to find out different problems such as open seam, needle holes & marks, etc.
|
|
06
|
Final inspection
|
In the final inspection, the quality inspector should check different issues about the garments such as shade variation from one part of the garment to another, correct labeling, etc.
|
|
07
|
Packing
|
Here, the quality inspector should check various problems of packing according to buyers’ instructions such as dirt & stains, the correct size of poly bag, garment quantity per carton, etc.
|
Speech from the writer:
If you can read this article very carefully then you can easily answer the following questions in the interview:
- Process flow chart of the quality inspection system in the readymade garment sector.
- Method of quality inspections in the garment Sector.
- Method of quality Inspections in the apparel sector.
- Process flow chart of 4 point quality inspections system in the garments sector.
- Process flow chart of 4 point quality inspections system in the apparel sector.
- Study on quality inspections in knit garments production.
- Study on quality inspections in woven garments production.
- Study on quality management system in the clothing industry.
- Study on quality management system in the apparel industry.
Mayedul Islam is a Founder and Editor of Garments Merchandising. He is an Expert in Garments Merchandising. Writing is his passion. He loves to write articles about Apparel, Textile and Garment Washing specially on Merchandising. Mail him at mayedul.islam66@gmail.com
Garment factary quality control system
so wonderful
Dear sir, Many many thanks for shareing informetion RMG Sector.
U r most wc.
good morning sir im sadhasivam from bangalore i kindy request for you i need shirt garments in line inspection report and final inspection sheet , this is very use full for my job
Dear Sir
Thanks & Very much useful to us. .I want to meet you …as I have inspired by your article. ..I am having 14 years experience in quality
To develop a successful career in a responsible position at a well-structured organization and successfully apply acquired educational and interpersonal skills to enhance organizational coefficients.
WORKING EXPERIENCE.
Hi Sir,
Thank you so much your Sharing. I wish one day I’m want to work QA or QI but as now I’m Quality Controller. GOD BLESS U .
jessica.
Sir thank you very much for most useful article you shared in this post. I want to know more and more about garment processing,quality controlling,production and manufacturing from you.
Hope you will help me to make my dream really.
Good info. Thanks
Nice content.Thanks
Great article with good information which is worth reading it. Thanks
Good article with best info and it worth reading it. Thanks
Good article with best content which is very useful. Thanks
Best article with good info . Thanks
Wc
Very Good Article with useful content .Thanks for info
A good article which is worth reading it. Thanks for information
The article is very impressive and worth reading it . We are expecting more from you. Thanks for sharing information
Good article with useful content and expecting much more such articles from your end . Thanks for information
A good article which is worth reading it . Thanks for information
A good article which is worth reading it. Thanks for the Information.
Interesting Article with useful information. Thanks for sharing