Process Flow Chart of Garments Sample Making

Process Flow Chart of Garments Sample Making:

Garments samples play an important role in receiving a garments export order. The sample section of the garments manufacturing factory has done this job. As a result, among all the other sections like cutting, sewing, finishing, etc. sample section gets the maximum priority in demands. A garment merchandiser should have an excellent idea about the process flow chart of sample making which will help him to facilitate the other duties of a garments export order.

Garments sample making

Process Sequence of Garments Sample Making:

Received tech pack from the buyer
↓
Pattern making
↓
Fabric cutting
↓
Print or embroidery (if required)
↓
Sewing
↓
Finishing
↓
QC check
↓
Send to the buyer for approval

All the above processes of garments sample making have discussed in the below table:

SL No.	Process	Procedure
01	Received tech pack from the buyer	It is the first step of a garment export order. Here garments merchandiser receives all the tech pack from the buyer, where tech pack contains all the required information about the garments order such as reference sample, measurement chart, print instruction, embroidery instruction, wash instruction, etc.
02	Pattern making	Here sample pattern has to develop according to the tech pack (measurement chart) provided by the buyer.
03	Fabric cutting	After developing a sample garments pattern, the fabric has to cut here by following the pattern. It’s a very important section to approve the sample in the very first shot.
04	Print or embroidery (if required)	If the tech pack contains print or embroidery instructions then those should be completed in the cutting fabrics according to the tech pack.
05	Sewing	Sewing is another important section to approve the sample by the buyer in the very shot. Here, garments are sewn according to the measurement chart. It should be noted that during sewing extra care should be taken to make fault free sample garment.
06	Finishing	Ironing or pressing has done in the garments here according to the measurement chart.
07	QC check	After completing all the above processes, a quality controller inspects the sample garment here by following the tech pack which is provided by the buyer. if arise any problem here then the sample garment is sent to the required section for making fault-free clothing.
08	Send to the buyer for approval	After checking the sample garment by the quality controller (QC), the garment was sent to the buyer for approval. If it’s approved by the buyer then the garments merchandiser can start the next processes for the garments production.

Mayedul Islam

Mayedul Islam is a Founder and Editor of Garments Merchandising. He is an Expert in Garments Merchandising. Writing is his passion. He loves to write articles about Apparel, Textile and Garment Washing specially on Merchandising. Mail him at mayedul.islam66@gmail.com

2 comments

Process Flow Chart of Garments Sample Making